setting up easyworship to use foldback output


If you want to set up your Foldback Output for a third or fourth monitor, the instructions below will walk you through the process.


    1. Open EasyWorship.
    2. Click  EasyWorship > Settings... to open the Options window.


    1. Select Foldback on the left. 
    2. Under the General tab, check the box to Enable support for display Foldback (stage display).
    3. Select NDI or Monitor 3 (or whatever monitor you want to send it to) from the Output Monitor drop-down list.
    4. Click OK.


       NOTE                If you want to send the Foldback Output to NDI, choose NDI Stream from the Output Monitor dropdown.